Panasonic PN28080K-ID Operation Manual

Also see for PN28480K-ID: Operation manual Operation manual Installation guide

Contents

Panasonic PN28080K-ID Operation Manual Manual pdf 34 page image

343.1.12. System SecuritySelect "Basic Config" and System Security" and then "System Security" to open thescreen shown in Figure 3-12. On this screen, you can configure the various settingsfor accessing this switch for configuration and management.Figure 3-12 System SecurityScreen DescriptionConsole Displays the idle timeout settings (in minutes) for terminating a console-con-nected session if no input is made. The factory default setting is 5 minutes.Telnet Displays the idle timeout settings (in minutes) for terminating a Telnet-con-nected session if no input is made. The factory default setting is 5 minutes.SSH UI Idle Displays the timeout settings (in seconds) terminating a SSH-connected sessionif no input is made. The factory default setting is 5 minutes.Idle Displays the time to want for response to SSH authentication.The factory default setting is 120 seconds.Retries Time Displays the number of times of retransmission of SSH authentication.The factory default setting is 5.SNMP Agent Sta-tusDisplays the SNMP access settings. "Disabled" is the factory default setting.Enable Access is enabled.Disable Access is disabled.Telnet Server Sta-tusDisplays the Telnet access settings. "Enable" is the factory default setting.Enable Access is enabled.Disable Access is disabled.Web Server Status Displays the Web access settings. "Disable" is the factory default setting.Enable Access is enabled.Disable Access is disabled.