1.5.4.2 Emergency CallDescriptionAn extension user can dial the preprogrammed emergency numbers after seizing a trunk regardless of therestrictions imposed on the extension.Conditions• A specified number of emergency numbers can be stored (some may have default values).• Emergency numbers may be called even when:– in Account Code—Forced mode (® 1.5.4.3 Account Code Entry)– in any TRS/Barring levels (® 1.9.1 Toll Restriction (TRS)/Call Barring (Barring))– after the preprogrammed call charge limit is reached (® 1.9.2 Budget Management)– in Extension Dial Lock (® 1.9.3 Extension Dial Lock)• CLIP Number Notification (KX-TDA100/KX-TDA200/KX-TDA600 only)When dialling an emergency number, the preassigned CLIP number for the extension will be sent as alocation identification number. (® 1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP))The CLIP number assigned to the extension will be sent regardless of the settings such as CLIR or CLIPnumber assigned to an ISDN port to be used. This feature is only available when using a PRI (PRI23) linewith E911-compatible services.PC Programming Manual References9.4 [7-4] Emergency DialPT Programming Manual References[304] Emergency NumberFeature Guide References3.1 Capacity of System ResourcesFeature Guide 891.5.4 Trunk Call Features