2.2.3 Tenant ServiceDescriptionThis PBX can be shared with a certain number of tenants.1. Tenant ConfigurationTenant MemberThe tenant members consist of extension user groups. One extension user group can belong to only onetenant. Therefore, one extension can belong to only one tenant.(® 2.2.2 Group)Time ServiceEach tenant has a Time Table. The Start and/or End time of each time mode (day/lunch/break/night) canbe set for each day of the week. The Time Table numbers correspond to the tenant numbers respectively.(® 2.2.4 Time Service)[Example]Tenant 1Use Time Table 1ExtensionUser Group 1ExtensionUser Group 2ExtensionUser Group 3ExtensionUser Group 4Tenant 2Use Time Table 2ExtensionUser Group 5ExtensionUser Group 62. System ManagementEach of the following system management items can be assigned to each tenant.a. Tenant Operator (extension number/floating extension number of incoming call distribution group/none) (® 2.2.5 Operator Features)® 8.6 [6-6] Tenant— Operator (Extension Number)b. ARS Mode (Off/Local Access/All Access/System) (® 1.10.1 Automatic Route Selection (ARS))® 8.6 [6-6] Tenant— ARS Modec. Music Source for Music on Hold (System/BGM Number/Cyclic Tone)(® 1.13.4 Music on Hold)® 8.6 [6-6] Tenant— Music On Holdd. System Speed Dialling (System/Extended for KX-TDA30 or System/Tenant Exclusive forKX-TDA100/KX-TDA200/KX-TDA600)(® 1.6.1.5 Speed Dialling—Personal/System)® 8.6 [6-6] Tenant— System Speed DialHardware Requirement: An EMEC or MEC card[Programming Example]Tenant No. Operator ARS Mode Music Source System SpeedDialling1 Extn.101 Local Access System*3 System*42 None*1 System*2 Cyclic Tone Extended/Tenant Exclusive394 Feature Guide2.2.3 Tenant Service
