1.4.1.3 Call PickupDescriptionAn extension user can answer a call ringing at any other extension.The following types are available:Type Picking up Call TypeDirected A specified extension’s call.Group A call within a specified call pickup group.Call Pickup Deny:Preventing other extensions from picking up calls ringing at your extension is also possible.Conditions• Call Pickup applies to:Intercom, trunk, and doorphone calls• Internal Call BlockAn extension that is restricted by COS from calling certain extensions (® 1.1.2.2 Internal Call Block) alsocannot pick up any calls ringing at those extensions.[Directed Call Pickup]• A user can also pick up a call to a specified extension by pressing the corresponding DSS button. Thisfeature is only available when (1) the user’s extension is allowed to use this feature through COSprogramming, (2) DSS buttons for extensions or incoming call distribution (ICD) groups have this featureenabled through system programming, and (3) the light pattern of DSS buttons for incoming calls toextensions or ICD groups is set to "On or Flash" through system programming.The light pattern of a DSS button for an incoming call to an extension or incoming call distribution groupcan be programmed through system programming. Call Pickup is available only when the DSS button isflashing red.[Group Call Pickup]• A specified number of call pickup groups can be created, each of which consist of extension user groups.One extension user group can belong to several call pickup groups. (® 2.2.2 Group)[Example]ExtensionUser Group 1Call Pickup Group 1Extn. 100 Extn. 101ExtensionUser Group 2Extn. 102 Extn. 103ExtensionUser Group 3Extn. 104 Extn. 105Call Pickup Group 2 Call Pickup Group 3ExtensionUser Group 4Extn. 106 Extn. 107PC Programming Manual References4.8 [2-6-1] Numbering Plan—Main—Features→ Group Call Pickup80 Feature Guide1.4.1 Answering Features
