Button UsageMONITOR Used for a hands-free dialling. Also used to monitor theparty’s voice in hands-free mode.MESSAGE Used to leave a message waiting indication or call backthe party who left the message waiting indication.REDIAL Used to redial the last dialled number.TRANSFER Used to transfer a call to another party.Flexible CO (Trunk)Used to make or receive a trunk call or can be reassignedto a different Trunk Access button (Default: S-CO) or toanother feature button.INTERCOM Used to make or receive intercom calls.AUTO ANS (Auto An-swer)/MUTEUsed to receive an incoming call in hands-free mode, orused for microphone or handset mute during a conver-sation. (Dual feature button)VOICE CALL/MUTEUsed to monitor an intercom call automatically (ahands-free conversation is not possible). Also used forhandset microphone mute during a conversation.AUTO DIAL/STORE Used for System/Personal Speed Dialling and storingprogramme changes.CONF (Conference) Used to establish a multiple-party conversation.FWD/DND Used to perform FWD or DND. (Dual feature button)PAUSE Used to insert a pause in a stored number. With an APT,it is used as the PROGRAM button.Soft Used to select the item displayed on the bottom line ofthe display.SELECT Used to select the displayed item or to call the displayednumber.SHIFT Used to access the second level of Soft button items.MODE Used to shift the display to access various features.[DSS Console]Button UsageANSWER Used to answer an incoming call or place the current callon hold and answer another call with one touch.RELEASE Used to disconnect the line during or after a conversationor to complete a Call Transfer.Flexible CO (Trunk) Used to make or receive a trunk call or can be reassignedto a different trunk or to another feature button.Flexible DSS (Direct Station Selection)Used to access an extension with one touch. Every but-ton is programmed to correspond to an extension. DSSbuttons can also be reassigned to other features.234 Feature Guide1.20.1 Fixed Buttons
