1.30 Networking Features1.30.1 TIE Line ServiceDescriptionA TIE line is a privately leased communication line between two or more PBXs, which provides cost effectivecommunications between company members at different locations. The TIE lines can be used to call throughthe PBX to reach another switching system (PBX or telephone company). By using TIE lines, the PBX cansupport not only communications with the public network but with other company members in the privatenetwork where the PBX is included.InterfaceThe following interfaces can be used to establish a private network:Interface Network TypeE & M AnalogueT1 (TIE [E & M]) Digital (64 kbps ´ 24 channels)E1 Digital (64 kbps ´ 30 channels)BRI/PRI (QSIG) Digital (ISDN 2B+D/30B+D/23B+D)VoIP Internet Protocol (IP)The available interfaces depend on the cards installed in the PBX.® 3.14 [1-1] Slot—Port Property - BRI Port—Network Numbering Plan— Trunk Property® 3.16 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Network NumberingPlan— Trunk Property® 3.19 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)— Trunk Property® 3.25 [1-1] Slot—Port Property - E1 Port— Trunk Property® 3.28 [1-1] Slot—Port Property - EM Port (KX-TDA100/KX-TDA200/KX-TDA600 only)— Trunk PropertyExplanation1. Making a TIE Line CallOne of the following two methods can be used to make a TIE line call.a. Extension Number Method (Access without PBX Code)Dial the [Extension Number] only.328 Feature Guide1.30.1 TIE Line Service
