1.6.1.5 Speed Dialling—Personal/SystemDescriptionAn extension user can make calls using abbreviated dialling for frequently dialled numbers which are storedin the PBX extension data, or the PBX system data.Personal Speed Dialling is also known as Station Speed Dialling.Conditions[General]• Any number (e.g., telephone number, feature number) can be stored in a speed dialling number. A namecan be assigned to each Personal Speed Dialling number through personal programming, and SystemSpeed Dialling number.• Call Directory—Speed DiallingDisplay PT users can make a call by selecting stored names on the display.[Personal Speed Dialling]• Display LockAn extension user can lock the Personal Speed Dialling number display to prevent the numbers from beingviewed at any extension through personal programming (Display Lock). In this case, the Incoming/OutgoingCall Log displays and the SVM Log display are also locked, and the voice messages in the user’s messagebox cannot be played back. An extension personal identification number (PIN) is required to use thisfeature. (® 1.28.1 Extension Personal Identification Number (PIN))• When an EMEC or MEC card is installed in the PBX, the number of entries programmable for eachextension is increased.[System Speed Dialling]• TRS/Barring Override by System Speed DiallingIt is possible to override the TRS/Barring using the System Speed Dialling. (® 1.9.1 Toll Restriction (TRS)/Call Barring (Barring))• System Speed Dialling Display by AUTO DIAL/STORE ButtonPressing the AUTO DIAL/STORE button on a display DPT while on-hook can display the System SpeedDialling Directory.• When an EMEC or MEC card is installed in the PBX, System Speed Dialling numbers can be assignedseparately for each tenant, depending on the PBX used:– KX-TDA30: Each tenant can select to use either the original set of common System Speed Diallingnumbers or the additional common set.– KX-TDA100/KX-TDA200/KX-TDA600: Each tenant can select to use either the original set of commonSystem Speed Dialling numbers or the set of System Speed Dialling numbers designated specificallyfor that tenant.Installation Manual ReferencesKX-TDA302.5.8 MEC Card (KX-TDA3105)KX-TDA100/KX-TDA2002.3.2 MEC Card (KX-TDA0105)KX-TDA6002.3.2 EMEC Card (KX-TDA6105)110 Feature Guide1.6.1 Memory Dialling Features
