2.16 [10] CO & Incoming CallPC Programming Manual 7512.16.2 [10-2] DIL Table & Port SettingsDirect In Line (DIL) or Direct Dialling In (DDI)/Direct Inward Dialling (DID) can be selected for eachtrunk as the method of distributing incoming trunk calls to certain destinations. For each trunk towhich DIL distribution is set, different destinations can be programmed depending on the time mode(day/lunch/break/night). If desired, Calling Line Identification (CLI) distribution can be used inconjunction with DIL distribution.For KX-TDA600, all supported cards are displayed in the Select Shelf & Slot list with their shelf andslot numbers. Select the card to programme, or select "All" to display all matching cards.DILFor each trunk to which DIL distribution is set, different DIL destinations can be programmeddepending on the time mode (day/lunch/break/night). Generally, DIL distribution is used for trunk callsfrom analogue trunks. Tenant number and VPS trunk group number can also be programmed for eachtrunk.To assign DIL destination numbers, enter directly or click Destination Setting (see 2.1.6 ExtensionNumber Setting).Shelf (KX-TDA600 only)Indicates the shelf position (reference only).Value RangeShelf numberMaintenance Console Location2.16.2 [10-2] DIL Table & Port SettingsProgramming Manual ReferencesNoneFeature Guide ReferencesNoneSlotIndicates the slot position of each trunk card (reference only).Value RangeSlot numberMaintenance Console Location2.16.2 [10-2] DIL Table & Port SettingsProgramming Manual ReferencesNoneFeature Guide ReferencesNone
