2.8 [2] System426 PC Programming Manual2.8.16 [2-8-3] Ring Tone Patterns—Call from OthersDifferent ring tone patterns can be selected for incoming intercom calls and ringing triggered bycertain PBX features (Timed Reminder, Call Back, and Live Call Screening). A maximum of 8 RingTone Pattern Tables can be programmed, and any pattern table can be selected for use by anextension.For more information on ring tone patterns, see "1.1.3.2 Ring Tone Pattern Selection" in the FeatureGuide.Extension—Ring Tone Pattern Plan 1–8Specifies the ring tone pattern for incoming intercom calls.Value RangeSingle, Double, Triple, Option 1, Option 2Maintenance Console Location2.8.16 [2-8-3] Ring Tone Patterns—Call from OthersProgramming Manual References2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Ring Pattern Table2.10.10 [4-2-1] Portable Station—Extension Settings—Main—Ring Pattern TableFeature Guide ReferencesNoneTimed Reminder—Ring Tone Pattern Plan 1–8Specifies the ring tone pattern for Timed Reminder alarms.Value RangeSingle, Double, Triple, Option 1, Option 2Maintenance Console Location2.8.16 [2-8-3] Ring Tone Patterns—Call from OthersProgramming Manual References2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Ring Pattern Table2.10.10 [4-2-1] Portable Station—Extension Settings—Main—Ring Pattern TableFeature Guide ReferencesNoneCall Back—Ring Tone Pattern Plan 1–8Specifies the ring tone pattern for callback ringing by Automatic Callback Busy.
