2.9 [3] Group504 PC Programming Manual2.9.14 [3-6] Extension Hunting GroupIf an extension within an idle extension hunting group is called when it is busy or in DND mode, thecall can be redirected to another extension in the same hunting group, according to a preprogrammedhunting type. If there is no idle extension in the group, the call can then be redirected to the overflowdestination, which can be different depending on the time mode (day/lunch/break/night). A maximumof 64 (with the KX-TDA30/KX-TDA100/KX-TDA200) or 128 (with the KX-TDA600) hunting groups canbe programmed, each containing up to 16 extensions.To assign members to the group, click Member List. To assign extensions as overflow destinationseasily, click Destination Setting (see 2.1.6 Extension Number Setting).Hunting Group NameSpecifies the name of the hunting group.Value RangeMax. 20 charactersMaintenance Console Location2.9.14 [3-6] Extension Hunting GroupProgramming Manual ReferencesNoneFeature Guide References1.2.1 Idle Extension HuntingHunting TypeSpecifies the hunting type for the hunting group.Value RangeCircular: Circulates until the call is answered or overflowedTerminated: Terminates at the last extensionMaintenance Console Location2.9.14 [3-6] Extension Hunting GroupProgramming Manual ReferencesNoneFeature Guide References1.2.1 Idle Extension Hunting2.2.2 GroupOverflow—Day, Lunch, Break, NightSpecifies the overflow destination of an unanswered call in each time mode.
