1.2 PC Programming18 PC Programming ManualInstalling the Maintenance ConsoleNotes• To install or uninstall the software on a PC running Windows 2000 Professional or WindowsXP Professional, you must be logged in as a user in either the "Administrators" or "PowerUsers" group.• To connect the PC to the Hybrid IP-PBX via USB, the KX-TDA USB driver must be installed.Follow the instructions of the wizard to install the KX-TDA USB driver. When the Hybrid IP-PBX is first connected to the PC via USB, you may be asked to select the appropriate USBdriver. Browse for and select the KX-TDA USB driver that was installed previously.Starting the KX-TDA Maintenance Console and Assigning the BasicItems (Quick Setup)When you start the KX-TDA Maintenance Console with the Installer Level Programmer Code andconnect to the Hybrid IP-PBX for the first time after initialisation (with the factory default setting),Quick Setup will launch automatically. During Quick Setup, you will set up the following basic items:• Date and Time of the Hybrid IP-PBX. The date and time set to the PC's clock will be used.• System Password for installer for PC programming.• Operator and manager settings. Operator extensions for all time modes (day/lunch/break/night) can be assigned.• Flexible Numbering plan to Type 1 or Type 2. If Type 1 (with ) is selected, " " must prefixall feature numbers (except access numbers) when an extension user wants to use afeature.• Operator call and Idle Line Access/ARS numbers.• Remote Maintenance Dial Number. Enter the complete telephone number of the Hybrid IP-PBX (including the country code). When necessary, this number will be used to access theHybrid IP-PBX from a remote location for maintenance purposes.1. Copy the setup file of the KX-TDA Maintenance Console toyour PC. (Its icon is shown here, on the left.)2. Double-click the setup file to run the installer.3. Follow the on-screen instructions provided by theinstallation wizard.1. Connect the PC to the Hybrid IP-PBX with a USB cable.2. Start Maintenance Console from the Start menu.3. "Information Before Programming" appears.a. Carefully read this important additional information,which includes updates to this and other manuals.b. Click [OK] to close this window.
