2.9 [3] GroupPC Programming Manual 5072.9.16 [3-7-1] VM(DPT) Group—System SettingsA Panasonic Voice Processing System (VPS) with DPT Integration can be connected to DPT portsof the PBX. The DPT ports that are connected to the VPS are called a VM (DPT) Group.With the KX-TDA30, a maximum of 1 VM (DPT) Group can be programmed; with the KX-TDA100/KX-TDA200, 2 VM (DPT) Groups can be programmed; and with the KX-TDA600, 8 VM (DPT) groupscan be programmed.Call Waiting on VM GroupEnables the queuing of calls when all extension ports of the VM (DPT) group are busy. (Call Waitingtone is not sent to any VM port.)Value RangeDisable, EnableMaintenance Console Location2.9.16 [3-7-1] VM(DPT) Group—System SettingsProgramming Manual References2.7.5 [1-1] Slot—Extension PortFeature Guide References1.2.2.4 Queuing Feature1.24.1 Voice Mail (VM) GroupIntercept to MailboxEnables the PBX to send the mailbox number of the called extension to the VPS when a call isredirected to the VM (DPT) group by Intercept Routing. When the VPS receives the mailbox number,the VPS answers the call with the appropriate mailbox.Value RangeDisable, EnableMaintenance Console Location2.9.16 [3-7-1] VM(DPT) Group—System SettingsProgramming Manual References2.7.5 [1-1] Slot—Extension Port2.9.1 [3-1-1] Trunk Group—TRG Settings—Intercept (not available for MPR Software File Version3.1000 or later)—Intercept Destination—Day, Lunch, Break, Night (not available for MPR SoftwareFile Version 3.1000 or later)2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 1—Intercept Destination—When calledparty does not answer—Day, Lunch, Break, Night2.10.10 [4-2-1] Portable Station—Extension Settings—Option 1—Intercept Destination—Whencalled party does not answer—Day, Lunch, Break, Night
