Feature OperationCall SplittingWhen talking to one party while the other party ison hold, you can swap the calls back and forth(alternately).• Talking to Two Parties Alternately (CallSplitting) (Page 71)To alternate between the parties leaving one party onhold temporarily(TRANSFER) + extension no. + Talk +(TRANSFER) + TalkTo leave the conversation and then let the two partiestalk(TRANSFER) + extension no. + Talk +(TRANSFER) + go on-hookCall TransferYou can transfer a held call without talking, andgo on-hook even if the transferred party does notanswer the call.• Transferring a Call (Call Transfer) (Page 71)Call Transfer(TRANSFER) + phone no.Call WaitingSending a Call Waiting:You can inform the called party that your call iswaiting.Answering Call Waiting in the PBX:During a conversation, a call waiting tone or voiceannouncement through the speaker or thehandset occurs when an outside call has beenreceived or another extension is letting you knowa call is waiting.Answering Call Waiting from the TelephoneCompany:This is an optional telephone company service.You can receive a call waiting tone and thecaller’s information. For details, consult yourtelephone company.Receiving Call Waiting:During a conversation, you can be informed of acall waiting with a tone or voice announcementthrough your built-in speaker or handset.• When the Dialed Line is Busy or There is NoAnswer (Page 86)To send a Call Waiting NotificationTo disconnect the second call and then talk to theoriginal partygo on-hook + go off-hook +To answer a Call Waiting from the Telephone Company(TRANSFER) +To set for intercom calls+ (Tone)/ (Whisper OHCA)To cancel for intercom calls (Manual Call Waiting)(No call)To set for outside calls (Automatic Call Waiting)(Tone)To cancel for outside calls(No tone)CO Line Group AccessYou can select an idle CO line in the specified COline group automatically.+ CO line group no. (2 digits) + outside phone no.94 Operating Instructions Document Version 2010-01PBX Feature List
