Panasonic KX-NT400 Operating Instructions Manual

Also see for KX-NT400: Brochure & specs Brochure & specs Operating instructions User manual Operating instructions

Contents

Panasonic KX-NT400 Operating Instructions Manual Manual pdf 168 page image

Chat Log (Export Only)Select the check box to export the chat log.For details about the chat log, see "Chat(Page 83)".NoteSD Memory Card InformationConfirm the following before using an SD memorycard.• A compatible card is inserted (see "CompatibleSD Memory Cards (Page 181)").• The SD memory card has been formatted usingthe correct format (see "Formatting SD MemoryCards (Page 182)").• The SD memory card is not locked (see "WriteProtection (LOCK) (Page 181)").• Data stored on SD memory cards can becorrupted if the card is exposed toelectromagnetic fields, static electricity, etc. Werecommend to back up important data stored onSD memory cards.• The KX-NT400 cannot delete the contents ofthe SD memory card unless you format it.Use computers to individually delete thecontents of an SD memory card.Initializing the KX-NT400You can initialize the KX-NT400 to reset all settings totheir default values. This feature is only accessible fromthe Setup screen.For details about initializing the KX-NT400, see "SettingInitialize (Page 165)".Restarting the KX-NT400Automatic RestartingWhen you change certain settings, the KX-NT400restarts automatically.On the Setup screenDuring the setup procedure, when you change settingson the following screens, the KX-NT400 automaticallyrestarts after you press Close on the Setup screen.• Language Settings (Page 159)• IP Address Settings (Page 159)• IP Port Settings (Page 160)• Quality of Service (QoS) Settings (Page 161)• Firmware Version Update (Page 163)• Setting Initialize (Page 165)Note• For details about the Setup screen, see"Setting Up the KX-NT400 (Page 157)".On the Options screenDuring normal use, when you change settings on eitherof the following screens, the KX-NT400 restartsautomatically after you press OK on the respectivescreen.• Display Settings (Page 113)*1• Language Settings (Page 115)*1 Restarting occurs only when Display Color is changed.Manual Restarting (System Reset)When the settings for the KX-NT400 have beenchanged via the PC Maintenance Console or changeshave been made to the PBX’s configuration, theKX-NT400 requires manual restarting.To perform a manual restart, disconnect the Ethernetcable (when using PoE) or unplug the AC adaptor fromthe power outlet.The KX-NT400 does not have a system reset button.Some examples of when the KX-NT400 needs to berestarted are listed below:• The Forward/Do Not Disturb settings have beenchanged via the PC Maintenance Console.• The presence status settings have been changedvia the PC Maintenance Console.• The floating extension number of the simplifiedvoice message system (SVM) or Panasonic VoiceProcessing System (VPS) has changed. In thiscase, make sure to set the new extension number168 Operating Instructions Document Version 2010-01Installation and Settings