PBX Feature ListYou can use the following PBX features. For details, refer to the corresponding sections in this guide or to theOperating Manual for the connected PBX.Note• The PBX features marked with a icon are only available for the manager extension.• The buttons with [ ] do not exist by default. To create the buttons, see "Customizing the Flexible Buttons(Page 133)".Feature OperationAbsent MessageYou can show the reason you do not answer, ifthe caller uses a Panasonic display proprietarytelephone.There are eight preprogrammed messages andone for your personal message (16 characters).• Presence Status Setting (Page 78)To set+ – (parameter) +To cancelAccount Code EntryYou may give a specified account code toextension users and check their telephone usage.You can specify an account code for each clientand check the call duration.+ account code + + outside phone no.Alternate Calling—Ring/VoiceThe caller can alternate the alerting method,either ring or voice, when making an intercom call.On the other hand, any extension can set thealerting method, either ring or voice, whenreceiving an intercom call.Automatic Callback BusyYou can set the telephone to receive callbackringing:• when a dialed extension becomes idle.(After you answer the callback ringing, thepreviously dialed extension number isautomatically redialed.)• when your desired CO line that is in use byanother extension becomes idle.(After you answer the callback ringing, youcan make a call using the seized CO line.)• Reserving a Busy Line (Automatic CallbackBusy) (Page 87)To setTo cancelDocument Version 2010-01 Operating Instructions 89PBX Feature List
