Panasonic AV-HS400AE Operating Instructions Manual

Contents

Panasonic AV-HS400AE Operating Instructions Manual Manual pdf 86 page image

865. System settingsThe table below lists the default settings.Button Signal DescriptionXP1 BLACK Internally generated signal, blackXP INPUT1 External video input 1: SDIXP3 INPUT External video input : SDIXP4 INPUT3 External video input 3: SDIXP INPUT4 External video input 4: SDIXP6 INPUT External video input : SDI, analogue component, analogue composite and DVIXP7 INPUT6 External video input 6: SDI, analogue component, analogue composite and DVIXP8 INPUT7 External video input 7: SDI, analogue component, analogue composite and DVIXP9 INPUT8 External video input 8: SDI, analogue component, analogue composite and DVIXP10 CBGD Internally generated signal, colour backgroundIf the optional board has not been connected, black images are input for INPUT to 8.5-2-2. Setting the crosspoint switchingThe timing at which the crosspoints are to be switched can be set.1 Press the [FUNC] button to light its indicator, and press the [XPT] button to display the XPT menu.2 Turn [F1] to display the XPTSwch sub menu.3 Turn [F], and select the switching timing using the Timing item.XPTSwch Timing3/3 AnyField1Field2Any: The crosspoints are switched in the nearest field. This is suited to live applications.Field1: The crosspoints are switched in field 1. This is suited to editing applications.Field2: The crosspoints are switched in field . This is suited to editing applications.