131. Functions in each area1-5. Transition areaKEY PATTFUNC N/R RWIPE DIRECTIONWIPE PATTERN / FUNCTIONONFTBPinPDSKCUT AUTOMIX WIPEBKGD KEYMIXWIPEDSK PinP IN/OUTMEMORY XPT SYSTEM7 8 910 11 12 > [BKGD] buttonThis executes the background transition when the [AUTO] button (D) or fader lever (J) has been operated.When the [BKGD] button is pressed and it is selected, its indicator lights in amber.If the [KEY] button (?) is now pressed, the indicator goes off, and the de-selected status is established.When the [BKGD] button and [KEY] button (?) are pressed at the same time, both buttons are set to theselected status.? [KEY] buttonThis executes the key transition when the [AUTO] button (D) or fader lever (J) has been operated.When the [KEY] button is pressed and it is selected, its indicator lights in amber.If the [BKGD] button (>) is now pressed, the indicator goes off, and the de-selected status is established.When the [BKGD] button (>) and [KEY] button are pressed at the same time, both buttons are set to theselected status.@ KEY ON tally LEDThis lights in red when the key ON status is established.A MIX, WIPE selection status tally LEDsThese light up to indicate whether MIX or WIPE has been selected when background transitions or keytransitions are executed.B [MIX] buttonThis is used to switch the A and B bus images while making them overlap.During the transition, the A and B bus output total is kept at 100 %.When the [MIX] button is pressed and it is selected, its indicator lights in amber.If the [WIPE] button (C) is now pressed, it goes off, and the de-selected status is established.C [WIPE] buttonThis is used to execute the transition using the pattern selected by the wipe pattern selector button (8).When the [WIPE] button is pressed and it is selected, its indicator lights in amber.If the [MIX] button (B) is now pressed, it goes off, and the de-selected status is established.
