|
33. Basic operations3-3-3. Key transitions1 Select key in the transition mode.Press the [KEY] button in the transition area to light itsindicator.To execute a background transition and key transition at thesame time, press the [BKGD] button and [KEY] button togetherto turn on both indicators.ONMIX WIPEBKGD KEYMIXWIPE2 Select the transition type.Use the [MIX] button or [WIPE] button in the transition area toselect the key transition mode.The indicator of the selected button lights in amber. At thesame time, the MIX or WIPE selection status indicator LEDlights.When WIPE has been selected, press the [KEY PATT] buttonto light its indicator, and select the wipe pattern.3 Set the time of the transition.On the TIME menu, turn [F1] to display the KEY sub menu.As with a background transition, set the transition time.BKGD PATTKEY PATTFUNCWIPE PATTERN / FUNCTIONONWIPE SQSL 3DPAGETIME WIPE COLORKEY CHR KEY FREEZEDSK PinP IN/OUTMEMORY XPT SYSTEM1 2 34 5 67 8 910 12114 Set the wipe direction.On the KEY menu, turn [F1] to display the Trans sub menu.Turn [F1] to set Nor (normal) or Rev (reverse) using theOutPatt item.Nor (normal): The key out pattern moves in the same direction as the key in pattern.Rev (reverse): The key out pattern moves in the opposite direction from the key in pattern.However, the operations in pattern example 3 are performed for “WIPE , 10, 11, 1”, and the operations inpattern example 4 (same operations for normal and reverse) are performed for “SQ , 10, 1” and “3D , 10,11, 1”.Pattern example 1 Pattern example Pattern example 3(WIPE, 10, 11, 1)Pattern example 4(SQ, 10, 1)(3D , 10, 11, 1)Key in SQ SQKey out (Nor) SQ SQKey out (Rev)SQ SQ: This indicates the areas where keys are combined.
|
