Panasonic AV-HS400AE Operating Instructions Manual

Contents

Panasonic AV-HS400AE Operating Instructions Manual Manual pdf 41 page image

413. Basic operations3-4-4. PinP adjustments Adjusting the PinP position and sizeWhile the PinP menu is selected, adjust the X and Y coordinates using the positioner in the positioner area,and adjust the size using the rotary encoder [Z]. Alternatively, the settings can be performed on the menus.1 Press the [FUNC] button to light its indicator, and press the [PinP] button to display the PinP menu.2 Turn [F1] to display the Position sub menu.3 Either operate the positioner and the rotary encoder [Z] or turn [F], [F3] and [F4] to set the X and Ycoordinates and the size using the X-Pos, Y-Pos and Size items.Position X-Pos Y-Pos Size4/6 0.00 0.00 100.00−50.00|+50.00−50.00|+50.000.00|100.00 Select the dot by dot modeWhen the system is set to the HD mode and an SD format image is to be used for the PinP material, theimages can be combined in the dot by dot mode (actual-size images).In this mode, the SD format image will not be up-converted so image deterioration can be prevented.Furthermore, since the images are handled in their actual size, the PinP size is fixed.On the IN/OUT menu, turn [F1] to display the Input menu, and select D by D using the Mode item.SD HDSDPinP materialPinP combined image Adjusting the densityThe step below is taken to adjust the PinP transparency (density).On the PinP sub menu, turn [F] to set the Density item.