Panasonic AV-HS400AE Operating Instructions Manual

Contents

Panasonic AV-HS400AE Operating Instructions Manual Manual pdf 27 page image

73. Basic operations3-2-4. Setting the wipe start positionAny start position can be set for wipe pattern WIPE and SQ #.The start position has one set of values for a background pattern and another set for a key pattern.1 Press the [FUNC] button to light its indicator, and press the [WIPE] button to display the WIPE menu.2 Turn [F1] to display the WIPEPos sub menu or the SQPos sub menu.WIPEPos Select X-Pos Y-Pos CopyTo↓3/5 BKGD 0.00 0.00 KEYKEY −100.00|+100.00−100.00|+100.003 Turn [F] to select the pattern (background or key) to be set using the Select item.4 Either operate the positioners or turn [F3] and [F4] to set the wipe start position using the X-Pos item andY-Pos item.These settings can be established only when WIPE or SQ # has been selected as the background patternor key pattern.5 Either operate the fader lever or press the [AUTO] button to check the wipe operation.(When, for instance, –0 has been set for X-Pos and –0 for Y-Pos, the following screen (or key) appearsfrom the bottom left and wipe is performed while the screen (or key) moves to the screen centre.)

Inside screen areaOutside screen area6 To copy the start position settings, press [F].The copy destination appears under the CopyTo item. (It will not change even if [F] is turned.)