1098. Setting menu tableA setting is entered when an item displayed (↓) is selected and then the [F1], [F], [F3], [F4] or [F] switch ispressed.(It will not be entered unless the switch is pressed.)Menu Sub menu Parameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select. Turn F to select. Turn F3 to select. Turn F4 to select. Turn F to select.TIME BKGD Parameter TransTime Unit —1/ Setting range 0 to 13s 0 to 999f Frame, Sec —Default value 1s 0f Sec —KEY Parameter TransTime Unit —/ Setting range 0 to 13s 0 to 999f Frame, Sec —Default value 1s 0f Sec —DSK Parameter TransTime Unit —3/ Setting range 0 to 13s 0 to 999f Frame, Sec —Default value 1s 0f Sec —PinP Parameter TransTime Unit —4/ Setting range 0 to 13s 0 to 999f Frame, Sec —Default value 1s 0f Sec —FTB Parameter TransTime Unit —/ Setting range 0 to 13s 0 to 999f Frame, Sec —Default value 1s 0f Sec —WIPE Border Parameter Border Width Soft1/ Setting range On, Off 0.1 to 100.0 0.0 to 100.0Default value Off .0 0.0BodrCol Parameter Hue Sat Lum Load ↓/ Setting range 0.0 to 39.9 0.0 to 100.0 0.0 to 108.0 White, Yellow,Cyan, Green,Magenta, Red,Blue, BlackDefault value 0.0 0.0 100.0 WhiteWIPEPos Parameter Select X-Pos Y-Pos CopyTo ↓3/ Setting range BKGD, KEY −100.00 to+100.00−100.00 to+100.00Display onlyDefault value BKGD 0.00 0.00SQPos Parameter Select X-Pos Y-Pos CopyTo ↓4/ Setting range BKGD, KEY −100.00 to+100.00−100.00 to+100.00Display onlyDefault value BKGD 0.00 0.00Modify Parameter Light-B Light-K Trim 4:3Auto/ Setting range On, Off On, Off Off, 16:9 (On), 4:3,4:3SmthOn, Off(Selection enabledwhen HD format isused)Default value Off Off 16:9 (On) OffCOLOR CBGD Parameter Hue Sat Lum Load ↓1/1 Setting range 0.0 to 39.9 0.0 to 100.0 0.0 to 108.0 White, Yellow,Cyan, Green,Magenta, Red,Blue, BlackDefault value 0.0 0.0 100.0 White
