Panasonic AV-HS400AE Operating Instructions Manual

Contents

Panasonic AV-HS400AE Operating Instructions Manual Manual pdf 11 page image

111. Functions in each area1-3. Wipe area8 Wipe pattern selector buttonsThese 1 buttons are used to select the corresponding wipe patternswhile the indicator of the [BKGD PATT] button (9) or [KEY PATT] button(9) is lit.They are used to select the corresponding setting menus when theindicator of the FUNC button (;) is lit.The indicator of the selected button lights in amber.BKGD PATTKEY PATTFUNCWIPE PATTERN / FUNCTIONONWIPE SQSL 3DPAGETIME WIPE COLORKEY CHR KEY FREEZEDSK PinP IN/OUTMEMORY XPT SYSTEM1 2 34 5 67 8 910 12 119 BKGD, KEY pattern selector buttonsThese buttons are used to switch the wipe pattern selection.The wipe pattern of a background transition is selected when theindicator of the [BKGD PATT] button is lit after it was pressed.The wipe pattern of a key transition is selected when the indicator of the [KEY PATT] button is lit after it waspressed.Each time the [BKGD PATT] button or [KEY PATT] button is pressed, the pattern page is changed in thesequence of WIPE, SQ (squeeze), SL (slide) and 3D (3 dimensions), and the pattern page indicator LED (:) isalso switched.: Pattern page indicator LEDsThese LEDs indicate the pages selected by the background transitions while the indicator of the [BKGD PATT]button is lit.They indicate the pages selected by the key transitions while the indicator of the [KEY PATT] button is lit.The WIPE, SQ (squeeze), SL (slide) or 3D (3 dimensions) LED lights.; FUNC buttonWhen this button is pressed, its indicator lights in amber. When a wipe pattern selector button (8) is pressedwhile the indicator of the FUNC button is lit, the setting menu indicated below the button is displayed on theLCD screen.[TIME]: The auto transition time settings are performed.  See 3-1-.[WIPE]: The modify, border or soft effect decoration settings are performed for wipe.  See 3-.[COLOR]: The colour background settings are performed.  See 3-7.[KEY]: The key settings are performed.  See 3-3.[CHR KEY]: The chroma key settings are performed.  See 3-3-6.[FREEZE]: The freeze status is displayed and freeze settings are performed.  See 3-8.[DSK]: DSK settings are performed.  See 3-.[PinP]: PinP settings are performed.  See 3-4.[IN/OUT]: The input/output signals are set.  See 4.[MEMORY]: The preset memory, frame memory or SD memory card settings are performed. See 3-10, 3-11 and 3-1.[XPT]: The crosspoint assignment is displayed and set.  See -.[SYSTEM]: The system settings are performed.  See .< Freeze status indicator LEDWhen this LED is lit, it means that one of the input signals is in the freeze status.The freeze status of the input signals assigned to the crosspoint buttons can be checked on the menu. See 3-8.Since the freeze status is established while this indicator is lit, the input image handled inside the unit willremain unchanged even when a different image is input.