63. Basic operations3-11. Frame memoriesStill images can be stored in the unit’s two internal frame memories for use.The still images are transferred to the frame memories through the AUX bus and an SD memory card.Conversely, the images in the frame memories can be transferred to an SD memory card.Images in the frame memories can be used as bus images by assigning FMEM1 and FMEM using the crosspointassignment function.Since the images stored in the frame memories are stored in the unit’s RAM area, the image data is erased oncethe power is turned off.Transfer them again after the power has been turned back on.3-11-1. Transferring images from the AUX bus1 Press the [FUNC] button to light its indicator, and press the [MEMORY] button to display the MEMORYmenu.2 Turn [F1] to display the FMEM sub menu.FMEM Signal Store Review Exec↓2/4 AUX FMEM1 OffFMEM2 On3 Turn [F3] to select the frame memory in which to store the images using the Store item.4 Turn [F4] to select on or off for the review display setting using the Review item.On: After the image is imported, the FMEM1 or FMEM image is displayed (for seconds) in the AUX bus.Even during review display, the next image can be imported.Off: No review display.5 Press the [F] switch (Exec) to import the still images to the frame memory.The still images can also be imported using the user buttons.“StrFM1” and “StrFM” have been allocated to the user buttons ( See -3-1.), and when one of thesebuttons is pressed, it will light for an instant, and the still image is then imported.PGMFMEM1 FMEM2AUXPGMINPUT1 INPUT2 INPUT3 INPUT4INPUT5 INPUT6 FMEM1 FMEM2AUXPGMFMEM2AUXPGMINPUT1 INPUT2 INPUT3 INPUT4INPUT5 INPUT6 FMEM1 FMEM2AUXUSER1 2Importing to FMEM1Review displayImported still image
