Panasonic AV-HS400AE Operating Instructions Manual

Contents

Panasonic AV-HS400AE Operating Instructions Manual Manual pdf 26 page image

63. Basic operations3-2-2. Selecting the wipe directionOperate the wipe direction selector buttons to select the wipe direction for the background transition.(The key transitions are set by the menu. The direction which is set here will not be reflected.  See 3-3-3.)When the [R] indicator is off:Wiping proceeds in the normal direction.When the [R] indicator is lit:Wiping proceeds in the reverse direction.When the [N/R] indicator is lit:The normal direction is replaced with the reversedirection (or vice versa) when the transition iscompleted.(The lit and extinguished statuses of the [R] button arealso switched in line with the direction of the wiping.)!.""!"!"!"2!! "!.2"! "3-2-3. Wipe decorations (border, soft effect)A border effect or soft effect can be added to the wiping of background transitions (but not for key transitions). Setting the border and soft effect1 Press the [FUNC] button to light its indicator, and pressthe [WIPE] button to display the WIPE menu.2 Turn [F1] to display the Border sub menu.3 Turn [F] to set On (or Off) for the border using theBorder item.4 Turn [F3] to set the width of the border using the Widthitem.5 Turn [F4] to set the amount of soft effect using the Softitem. The soft effect is OFF if 0.0 is set.Border Border Width Soft1/5 Off 5.0 0.0On 0.1|100.00.0|100.0When “On” has been selected as the Border item setting, the ratio of the soft effect to the border width isindicated as the amount of soft effect.When only the soft effect is to be added to wipe, select “Off” as the Border item setting. Setting the border colour1 On the WIPE menu, turn [F1] to display the BodrColsub menu.2 Turn [F], [F3] and [F4] to adjust the Hue, Sat and Lumof the border colour.To call the preset colourTurn [F] to select the preset colour using the Load item,and press the [F] switch.The Hue, Sat and Lum values are changed to the presetcolour values. To save the values that were set before calling thepreset colour, refer to “3-10. Preset memory”.BodrCol Hue Sat Lum Load↓2/5 0.0 0.0 100.0 White0.0|359.90.0|100.00.0|108.0YellowCyanGreenMagentaRedBlueBlack