|
744. Input/output signal settingsInputsignalsFS:On, OffMode:Normal, UC orD by D (cannot be selectedwhen the system format is70p)Video effectsOutputsignals1Delay:90H (7H) or 1F 2 See 4-1-1. See 4-11.Frame synchronizerDC(Down-converter)When the 1080/59.94i format is used: For 1080/0i, 70/9.94p and 70/0p, the delay of “Output signal 2 DC (90H)” is further delayed by +1F. For 1080/0i and 70/0p, 90H indicated below becomes 7H.OutPhs Input Non-synchronizedinputOutput signal 1NormalOutput signal 2DC (90H)Output signal 2DC (1F)System Mode FS Phase Delayamount Phase Delayamount Phase DelayamountSync signal (Ref): Black burst signal (BBST), tri-level sync signal (TRI), internal reference signal (INT)1H Normal Off Not possible Ref+1H 1H 1+90H 1H+90H In-phasewith 11H+1FNormal On Possible Ref+1H Max.1F+1H1+90H Max.1F+1H+90HIn-phasewith 1Max.F+1HUC/D by DOn(Forced)Possible0H(Example 1)Normal/UC/D by DOn(Forced)Possible In-phasewith RefMax.1F1+90H Max.1F+90HIn-phasewith 1Max.FSync signal (Ref): Black burst signal (BBAD)1H Normal Off Not possible Ref–90H+1H1H 1+90H 1H+90H In-phasewith 11F+1HNormal On Possible Ref–90H+1HMax.1F–90H+1H1+90H Max.1F+1HIn-phasewith 1Max.F–90H+1HUC/D by DOn(Forced)Possible0H(Example 2)Normal/UC/D by DOn(Forced)Possible Ref–90H Max.1F–90H1+90H(In-phasewith Ref)Max.1FIn-phasewith 1Max.F–90H Conversion based on the HD format applies for 1H. When DVE effects (SQ, SL, 3D) have been used as the video effects, the output signal is delayed by +1F. The phase and delay amount for the DVI-I input signals are the same as when UC/D by D is selected since theframe synchronizer is set to the On mode. The DVI-I output signals are delayed by +1F. When images are output to a multi view display, they are delayed by +1F.When DVI-I output signals are output to a multi view display, the output images are delayed by +F.
|
