Panasonic AJ-HD1400E Operating Instructions Manual

Also see for AJ-HD1400E: Mechanical Parts List

Panasonic AJ-HD1400E Operating Instructions Manual Manual pdf 44 page image

44Setup menus (continued)EDIT*1 Displayed menus may vary depending on the settings inmenu No. 25 SYSTEM FREQ. For details, refer to“Menus which are displayed” (page 32).“_____” indicates the factory setting.No./Item Description of setting302*1CONFI EDITFor selecting whether to perform simultaneousplayback during editing.0000 OFF :Simultaneous playback is not performed.0001 ON :Simultaneous playback is performed.303*1AUD EDIT INFor selecting how to connect the digital audio edit INpoints.0000 CUT :Cut processing0001 FADE :V-fade processing304*1AUD EDITOUTFor selecting how to connect the digital audio editOUT points.0000 CUT :Cut processing0001 FADE :V-fade processing307*1AFTER CUE-UPFor selecting the VTR’s mode upon completion of thecue-up operation.0000 STOP :The VTR is set to the STOP mode.0001 STILL :The VTR is set to the still picture (SHTL STILL)mode.0002 STILL2 :The VTR is set to the still picture (VAR STILL)mode.320*1EDITRPLCE1For setting the allocation of the channels for theanalog audio presets of a controller when a controllerwithout a function to control the edit presets of thedigital audio signals is used to edit the digital audiosignals of the VTR.The VTR’s CH1 edit presets are set to ON or OFFfollowing the analog audio signals specified by thecontroller.0000 N-DEF :Not set.0001 CH1 :The analog CH1 edit presets are followed.0002 CH2 :The analog CH2 edit presets are followed.0003 CH1+2 :The analog CH1 or CH2 edit presets are followed.321*1EDITRPLCE2As with menu item No.320, the VTR’s CH2 editpresets are set to ON or OFF following the analogaudio signals specified by the controller.0000 N-DEF :Not set.0001 CH1 :The analog CH1 edit presets are followed.0002 CH2 :The analog CH2 edit presets are followed.0003 CH1+2 :The analog CH1 or CH2 edit presets are followed.322*1EDITRPLCE3As with menu item No.320, the VTR’s CH3 editpresets are set to ON or OFF following the analogaudio signals specified by the controller.0000 N-DEF :Not set.0001 CH1 :The analog CH1 edit presets are followed.0002 CH2 :The analog CH2 edit presets are followed.0003 CH1+2 :The analog CH1 or CH2 edit presets are followed.No./Item Description of setting323* 1EDITRPLCE4As with menu item No.320, the VTR’s CH4 editpresets are set to ON or OFF following the analogaudio signals specified by the controller.0000 N-DEF :Not set.0001 CH1 :The analog CH1 edit presets are followed.0002 CH2 :The analog CH2 edit presets are followed.0003 CH1+2 :The analog CH1 or CH2 edit presets are followed.324* 1EDITRPLCECAs with menu item No.320, the VTR’s CUE editpresets are set to ON or OFF following the analogaudio signals specified by the controller.0000 N-DEF :Not set.0001 CH1 :The analog CH1 edit presets are followed.0002 CH2 :The analog CH2 edit presets are followed.0003 CH1+2 :The analog CH1 or CH2 edit presets are followed.