Panasonic AJ-HD1400E Operating Instructions Manual

Also see for AJ-HD1400E: Mechanical Parts List

Panasonic AJ-HD1400E Operating Instructions Manual Manual pdf 29 page image

29Setup (initial settings) (continued)6 Confirmation screen for SAVE is displayed.z When the PLAY button is pressed, the set value isstored and the display returns to the menu screen.z When the STOP button is pressed, the display returnsto the menu screen without storing the set value.7 When the MENU button is pressed, the display of themenu screen disappears.User default loading method1 Press the MENU button.A select screen for the major menu items is displayed onthe video monitor, and the names are displayed in thecounter display.2 Press the RESET button.The unit is now set to the default setting mode, and thedefault setting screen now appears on the video monitor.3 Incline the joystick up and down to adjust the cursor onthe default settings screen to the LOAD position andpress the joystick.The mode for this unit changes to the LOAD mode, theLOAD screen is displayed on the video monitor, and theitem name is displayed in the counter display.4 Incline the joystick up and down to adjust the cursor onthe LOAD screen to the “USER ¢ (ALL)” (¢ each valuefrom 1 to 3.) position and press the joystick.z When loading a set value other than SYSTEM menu inmemory, move the cursor to “USER ¢ (NOTSYSTEM)” (¢ each value from 1 to 3.) and press thejoystick.z To cancel the operation, move the cursor to “NO” andpress the joystick.5 LOAD confirmation will be displayed.z When the PLAY button is pressed, the set value isloaded and the display of the menu screen disappears.z When the STOP button is pressed, the display returnsto the menu screen without loading the set value.SET-UP MENU USER1(ALL) OK?YES/NOSELECT MODE¢ 0 ESCAPE1 LOAD2 SAVE3 PROTECTSET-UP MENU ¢ NOUSER1(ALL)USER2(ALL)USER3(ALL)USER1(NOT SYSTEM)USER2(NOT SYSTEM)USER3(NOT SYSTEM)SET-UP MENU USER1(ALL) OK?YES/NO