Configuring Your Server 4-27ExitThe Exit menu appears if you move the cursor to "Exit."The options on the menu are described below.Exit Saving ChangesExit after writing all modified BIOS Setup item values to CMOS.Exit Discarding ChangesExit leaving CMOS unmodified. User is prompted if any of the setup fields ware modified.Load Setup DefaultsLoad default values for all BIOS Setup items.IMPORTANT: This option sets [SATA RAID Enabled] in the[Advanced] - [I/O Device Configuration] menu to [Disable]. If theSATA hard disk drives are installed in your server and the onboardSATA RAID feature is used, change the parameter of the [SATA RAIDEnabled] from [Disable] to [Enable] before exiting BIOS Setup.Discard ChangesRead the previous values of the all BIOS Setup items from CMOS.Save ChangesWrite all BIOS Setup item values to CMOS.
