D-16 Installing Windows Server 2003Installing SCSI Controller DriverIf you utilize SCSI controller driver (N8103-65F/75), install it according to the following procedure:1. Start [Device Manager] from [Start] menu → [Control Panel]→[Administrative Tools] →[Computer Management].2. Double-click the SCSI Controller driver which Device Manager lists as unknown device.3. Click [Update Driver].4. When the "Update Device Driver Wizard" appears, select "Install from a list or specificlocation [Advanced]" and click [Next].5. Select "Don't search. I will choose the driver to install" and click [Next].6. Click [Have Disk..].7. Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppydisk drive, enter "a:\" into "copy manufacturer's file from:" and click [OK].8. Specify the following driver and click [Next].[INITIO INI-A10XU2W PCI SCSI Controller] (When N8103-65F board is installed.)[Adaptec SCSI Card 29320ALP - Ultra320 SCSI] (When N8103-75 board is installed.)The installation of the driver is completed.Restart the system according to the message appeared on the screen.SETTING FOR COLLECTING MEMORY DUMP(DEBUG INFORMATION)Set for collecting memory dump using the procedure described in Chapter 5.
