General Description 2-11AC LINK FeatureWhen the power cord of the server is connected to an uninterruptible power supply (UPS) unit, theserver supports the power linkage feature that enables control over the power supply from the UPSto the server. The AC LINK feature can be enabled or disabled with Power Management Setup inthe Server menu of the BIOS setup utility, "SETUP." (See Chapter 4.)SecurityThe BIOS setup utility provides a number of security features to prevent unauthorized or accidentalaccess to the system. Once the security measures are enabled, access to the system is allowed onlyafter the user enters the correct password(s). For example: Set and enable an administrative password. Set and enable a user password Check the user account when entering the BIOS setup utility or booting the system.NEC EXPRESSBUILDERThe CD-ROM that comes with your server contains a setup utility called "NECEXPRESSBUILDER." When you have first installed the server or append features to the server,use the NEC EXPRESSBUILDER to set up your server.Refer to Chapter 6 for details.IMPORTANT: Do not use the NEC EXPRESSBUILDER for anyother computers than the server, nor other NEC Express5800 seriesservers than the one that NEC EXPRESBUILDER is provided for. Notfollowing this instruction may cause failures.The major functions of the NEC EXPRESSBUILDER are: To install the OS.It installs an operating system. To diagnose the system.It diagnoses the server. To create a support disk.It copies utilities in the NEC EXPRESSBUILDER CD-ROM into a floppy disk to launchthem from the floppy disk. To update the BIOSIt updates the BIOS features of the server.
