Setting Up Your Server 3-5When you have selected a server site, hold the server by its bottom with at least three persons andcarry it to the site, then place it slowly and gently.IMPORTANT: Do not hold the server by its front mask to lift theserver. The front mask may be disengaged and damage the server.Do not install the server in the following locations as it may cause malfunctions of the server. Places with drastic changes in temperature (e.g., near a heater, air conditioner, orrefrigerator) Places with strong vibration Places with corrosive gas in presence, near chemicals, or with possibilities of chemicalssprayed over On a non-antistatic carpet Places with possibilities of falling objects Places where a power outlet that shares the ground line with another (especially the one towhich a device with large power consumption is connected) must be used for the server Do not install the server near equipment that generates power noise (e.g., contact spark atpower-on/power-off of commercial power supply through a relay). (To install the servernear equipment that generates power noise, ask your sales agent for separating the powerwiring or installing a noise filter.)
