2-6 General Description1 AC inletThe AC inlet is connected with the power cord.2 Fixing screwsSecures the left side cover.3 Cover lock plateInstalling a theft prevention deviceprotects the internal components of theworkstation from being stolen.4 Mouse connectorThe mouse connector is connected with the mouse coming with the server.5 Keyboard connectorThe keyboard connector is connected with keyboard coming with the server.6 USB connectorsThe USB connectors are connected with devices accepting the USB interface.7 Serial port connectorThe serial port connector is used to connect the server to a device with the serial interface.The server cannot be directly connected to a leased line through the connector.8 Printer port connectorThe printer port connector is connected with a printer with the Centronics interface.9 Monitor connectorThe monitor connector is connected with the display unit.10 LAN connectorThe LAN connector is connected with a network system on LAN (1000BASE-T/100BASE-TX/10BASE-T). The value following the bold-faced number indicates the port number.11 1000/100/10 lamp1000/100/10 lamp indicates the LAN transfer rate.12 Link/ACT lampThe Link/ACT lamp shows the LAN access status.
