5-36 Installing the Operating System with Express SetupIMPORTANT: To specify "Complete Memory Dump" to write the debuginformation is recommended. If the mounted memory size is largerthan 2GB, "Complete Memory Dump" cannot be specified so thatspecify "Kernel Memory Dump" instead. Specify the drive where there is a free area more than the size of"the memory capacity mounted on Express server + 12MB". In case the mounted memory size exceeds 2GB due to the addedmemory, change the write debugging information to [KernelMemory Dump] before adding memory. The size of debugginginformation (memory dump) to be taken also changes due toadding memory. Verify the size of the empty space in thedebugging information (memory dump) write destination drive.6. Click [Performance Options].7. Click [Change] on the [Virtual Memory] dialog box.8. Modify [Initial Size] in the [Paging File Size for Selected Drive] box to the value largerthan [Recommended Size], and click [Specify].IMPORTANT: Be sure to create memory dump with the size described above onthe OS partition. If [Default Size] of the paging file is specifiedto the value smaller than "Recommended" value, the correct debuginformation (memory dump) may not be collected. For more information on "Recommended" value, see "PartitionSize to be Created" described earlier. To prepare for the situation when any trouble occurred, werecommend you to press dump switch to confirm that the dumpwill be collected normally in advance. In case the memory is expanded, re-specify the paging file to suitthe new memory size.9. Click [OK].The message to restart the system may appear according to the modified specification.In such case, follow the message to restart the system.
