Installing the Operating System with Express Setup 5-3Express Setup uses "Configuration Diskette". The Configuration Diskette is a floppy disk thatincludes the configuration information for the server setup used in the automatic installation mode.Express Setup will perform all the process of the setup using the information in the floppy disk.During this procedure, you do not have to be in front of the Express server to confirm the state ofthe setup. Also, using the same Configuration Diskette used before allows you to re-setup yourserver with the same condition as before.Express Setup includes two types of installation method. Quick startQuick start uses the Configuration Diskette that the configuration parameters for serversetup are pre-loaded before starting the Express Setup. The configuration parameters areloaded by using the Configuration Diskette Creator (see Chapter 6). Normal startNormal start is to create the Configuration Diskette after starting the Express Setup.NOTES: Use the blank disk in the accessory box to create ConfigurationDiskette. You can create Configuration Diskette in advance using"Configuration Diskette Creator" included in NECEXPRESSBUILDER. If you create Configuration Diskette in advance, you canabbreviate the items that is necessary to input or select duringExpress Setup. (You can also create or modify the setupinformation restored in Configuration Diskette during ExpressSetup.) If you have a computer other than your servers that isrunning with Windows 95/98/Me/XP, Windows NT 3.51 or later,or Windows 2000, Windows Server 2003, we recommend you toedit setup information from the computer in advance usingConfiguration Diskette Creator.For more information on how to create Configuration Diskette usingConfiguration Diskette Creator, see Chapter 6.
