Lenovo RackSwitch G8264 Application Manual

Also see for RackSwitch G8264: Installation guide Product guide Product guide Command reference Installation guide

Contents

© Copyright Lenovo 2016 Chapter 41: Simple Network Management Protocol 655Switch Images and Configuration FilesThis section describes how to use MIB calls to work with switch images andconfiguration files. You can use a standard SNMP tool to perform the actions, usingthe MIBs listed in the table below.The table lists the MIBS used to perform operations associated with the SwitchImage and Configuration files.The following SNMP actions can be performed using the MIBs listed in the table: Load a new Switch image (boot or running) from an FTP, SFTP, or TFTP server Load a previously saved switch configuration from an FTP, SFTP, or TFTP server Save the switch configuration to an FTP, SFTP, or TFTP server Save a switch dump to an FTP, SFTP, or TFTP serverTable 47. MIBs for Switch Image and Configuration FilesMIB Name MIB OIDagTransferServer 1.3.6.1.4.1.26534.2.7.6.1.1.7.1agTransferImage 1.3.6.1.4.1.26534.2.7.6.1.1.7.2agTransferImageFileName 1.3.6.1.4.1.26534.2.7.6.1.1.7.3agTransferCfgFileName 1.3.6.1.4.1.26534.2.7.6.1.1.7.4agTransferDumpFileName 1.3.6.1.4.1.26534.2.7.6.1.1.7.5agTransferAction 1.3.6.1.4.1.26534.2.7.6.1.1.7.6agTransferLastActionStatus 1.3.6.1.4.1.26534.2.7.6.1.1.7.7agTransferPort 1.3.6.1.4.1.26534.2.7.6.1.1.7.8agTransferUserName 1.3.6.1.4.1.26534.2.7.6.1.1.7.9agTransferPassword 1.3.6.1.4.1.26534.2.7.6.1.1.7.10agTransferTSDumpFileName 1.3.6.1.4.1.26534.2.7.6.1.1.7.11