48 G8264 Application Guide for ENOS 8.4Easy Connect WizardLenovo EasyConnect (EZC) is a feature designed to simplify switch configuration.A set of predefined configurations can be applied on the switch via ISCLI. Bylaunching the EZC Wizard, you are prompted for a minimal set of input and thetool automatically customizes the switch software.The EZC Wizard allows you to choose one of the following configuration modes: Basic System mode supports settings for hostname, static management port IP,netmask, and gateway. Transparent mode collects server and uplink port settings. vNIC groups areused to define the loop free domains.Note: You can either accept the static defaults or enter a different port list foruplink and/or server ports. Redundant mode refers to VLAG settings.The EZC configuration will be applied immediately. Any existing configurationwill be deleted, the current active or running configuration will not be merged orappended to the EZC configuration.For any custom settings that are not included in the predefined configuration sets,the user has to do it manually.Notes: EZC is not available in stacking mode. To support scripting, the feature also has a single‐line format. For moreinformation, please refer to Lenovo Networking ISCLI Reference Guide.Configuring the Easy Connect WizardTo launch the EZC Wizard, use the following command:The wizard displays the available predefined configuration modes. You areprompted to select one of the following options:RS G8264# easyconnectRS G8264# easyconnectAuto configures the switch into a set configuration based on the inputprovided.Current configuration will be overwritten with auto configurationsettings.The wizard can be canceled anytime by pressing Ctrl+C.Select which of the following features you want enabled:#Configure Basic system (yes/no)?#Configure Transparent mode (yes/no)?#Configure Switch Redundant mode (yes/no)?
