71Using the Control Panel5 MOVE THE CURSOR TO THE PARAMETER YOU WANT TO CHANGEDecay time is on the “DECAY” page.Locate the “DECAY” page using the[][] buttons.“FAST” is on the right side of the pagemove the cursor (blinking value) to theright using the [][] buttons.6 CHANGE THE VALUEDecrease the value using the [VALUE]knob.NOTE: If you want to change other items,repeat the process 1 to 6.8 RECORD TO THE PATCH IF NECESSARYThe parameter “DECAY FAST” is a patch parameter, so, if you call another (orsame) patch, it is changed to the newly set value.If you need the changed value hereafter, you must record it to a patch.PATCH PARAMETERSPatch Parameters are unique to the currentpatch, and change with the programming ofeach patch. Many of the knobs/buttons on thetop panel are “Patch Parameters”The Parameters common to all the patchesare called “Global Parameter”, on the contrary.7 RETURN TO THE PLAY MODEPress the [PLAY] button. The displayreturns to the PLAY mode.UPPER PEDAL LOWERNUMBER NAMEPATCH ENTERVALUEMENU/EXITPLAYMixtureIIIce Hautbois8'Flute2'UPPER PEDAL LOWERNUMBER NAMEPATCH ENTERVALUEMENU/EXITPLAYUPPER PEDAL LOWERNUMBER NAMEPATCH ENTERVALUEMENU/EXITPLAYUPPER PEDAL LOWERNUMBER NAMEPATCH ENTERVALUEMENU/EXITPLAY
