17Hook-UpCONNECTING THE LESLIE SPEAKERAn 8-pin type Leslie speaker can be directly connected to this keyboard.v Switch keyboard OFF before connecting the Leslie speaker.BASIC CONNECTION OF THE LESLIE SPEAKERConnect the Leslie Speaker #2101, or #2101mk2 and the Leslie 8-PIN jack on this key-board with the exclusive 8-pin Leslie cable (optional LC-8-7M, not included).NOTE: The Leslie terminal on this unit is of 8-pin specifications. It is impossible to directly con-nect a 11-pin spec. Leslie speaker.1. Make the setting of Tone-Wheel organ.2. Switch “ON” the [BYPASS] button, set the [STATIONARY VOLUME] of the#2101/mk2 at desired volume.3. Repeat “ON/OFF” the [BYPASS] button with playing the keyboard, set the [RO-TARY VOLUME] of the #2101/mk2 at same volume which you can hear.MIDI CONTROL OF THE LESLIE SPEAKERTo control the parameters of the Leslie Speaker #2101, #2101mk2 (fine adjustment ofthe rotor speed or the rise time, etc.):1. Connect the MIDI OUT of this unit with the MIDI IN of the Leslie speaker with aMIDI cable.2. Set the keyboard channel - UPPER and the Leslie MIDI channel to the same chan-nel. (P. 111)When this unit detects that the Leslie speaker is connected, the Leslie parameters sentthrough MIDI from this unit are switched from the SK original to those for the Lesliespeaker.PHONESUSB MEMORYLESLIE SPEAKERS TO BE CONNECTEDThis keyboard is designed to connect with 3channel Leslie speakers such as #2101. How-ever, it is also possible to connect 1 channeltype Leslie speakers such as #3300 sendingthe stationary channels to the LINE OUT jacksindependently. (P. 86)LESLIE CHANNEL3 channel type Leslie speakers are equippedwith a stereo speaker system, independent ofthe rotor, to provide stereo sound for the ExtraVoices and direct organ sounds.A traditional 1-channel Leslie, such as a #122or #147 has no stationary speaker system, thusrequiring a separate amplifier/speaker for theExtra Voices or direct organ sounds.8-pin Leslie CableMIDI Cable (Optional)
