51Setting UpVIBRATO & CHORUSThe Hammond Vibrato & Chorus is another hallmark of the Classic Hammondsound. Vibrato alters the pitch slightly, as a violinist, singer, or guitarist may do. AndChorus combines a detuned signal with the original for a lush tone.[UPPER] buttonPressing [UPPER] button “ON” (red LED lit) will turn the Vibrato & Chorus effect onfor the UPPER Drawbars.[LOWER] buttonPressing [UPPER] button “ON” (red LED lit) will turn the Vibrato & Chorus effect onfor the LOWER Drawbars.[V1/C1], [V2/C2] buttonThese buttons are for setting the depth of the Vibrato & Chorus effects.V1 (C1): V1 (C1), light vibrato (chorus)V2 (C2): V2 (C2), vibrato (chorus) of standard depth.V1+V2 (C1+C2): V3 (C3), deepest vibrato (chorus)NOTE: While the power is on, the Vibrato and/or Chorus button LED’s will always be on. The ef-fect will not be active unless the UPPER or LOWER switches are pressed (LED on).[CHORUS] buttonThe CHORUS effect combines a slightly detuned signal with the original. To engage theChorus effect, press this button and the light will go ON.NOTE: Vibrato & Chorus is available on 5 Organ types; BType1, BType2, Mellow, Vx and Farf.NOTE: The speed etc. of the Vibrato & Chorus effects can be fine-tuned. (P. 83)NOTE: The Vibrato & Chorus effects on this keyboard come from a virtual model of the mechani-cal scanner as first used on the vintage B-3. It operates in the same manner, albeit in thedigital realm. (no moving parts)STATUS CHART OF EACH BUTTONBUTTON MODEV1/C1 V2/C2 CHORUS EffectOn Off Off V1Off On Off V2On On Off V3On Off On C1Off On On C2On On On C3DRAWBARS SELECTORGAN TYPE
