Canon imagePRESS C7000VP Series Trouble Shooting Information

Also see for imagePRESS C7000VP Series: Brochure & specs Installation manual Service guide Customer expectation document Customer expectation document

Contents

Canon imagePRESS C7000VP Series Trouble Shooting Information Manual pdf 128 page image

Trouble Shooting Information for C7000VP seriesPage 128 Rev. 2.02010/09/178.9 Reference Information8.9.1. Data size of SublogSublog file size can be larger than the SRAM size on RB-SRAM UNIT or the size secured onDRAM. The reason for this is that binary data on SRAM and DRAM is converted to the text dataonce and then encrypted. When RB-SRAM UNIT is equipped: Approx. 10MB When RB-SRAM UNIT is not equipped: Approx. 5MB8.9.2.Specifications regarding multiple Sublog files creation atauto-collection setting (Will be supported from iPRC7000VP and the followingproducts)When setting the auto-collection and overwriting mode, if 10 files are stored, the latest file isoverwritten (to keep the old log which was automatically collected at the failure occurrence).First of all, /APL_LOG/SUBLOG.txt is created by overwriting.Then, an empty space is searched in the order from SUBLOG01 to 10.txt and the data iscopied.With this specification, SUBLOG.txt is always recorded the latest log.When referring from 01 to 10, the time stamp of the file system is referred for judging (new orold).When all between 01 and 10 are used, the latest file is overwritten.When excerpting, all files are encrypted as SUBLOG01 to 10.bin.01 to 10: Automatically generated logs at auto-collection setting. Logs without numbers are thelatest logs that are internally used in Design and Evaluation Departments. (These logs areinternally operated, so they cannot be collected using SST and USB memory.)8.9.3. Timing to delete the Sublog from HDDWhen collecting the Sublog using SST and USB memory, the files in the device areautomatically deleted.8.9.4. When RB-SRAM UNIT is powered offLogs are disappeared after turning off and on the main power. They remain stored while thepower is on. They also remain stored after the software reboot.