Trouble Shooting Information for C7000VP seriesPage 105 Rev. 2.02010/09/175.2 Specifications for staple capacity of Finisher-AB1/AB2 DescriptionThe following are specifications for staple capacity of Finisher-AB1/AB2 by basis weight ofpaper (both small and large sizes).Weight of paper # of sheets applicable (Small size / Large size)64g to 80g 100sh / 50shover 80g to 81.4g 80sh / 50shover 81.4g to 105g: 60sh / 30shover 105g to 200g: 20sh / 10shover 200g to 300g: Cover and back cover onlyNote:- Thickness of stack has to be less than 11mm for small size, and less than 5.5mm for largesize.- Length of paper in feeding direction has to be as follows. For large size: 216.1mm to 482.7mm (e.g. 13x19, 12x18, SRA3, A3, B4, A4R, B5R,LDR, LGL, LTRR, EXER) For small size: shorter then 216mm (e.g. A4, B5, A5R, LTR, EXE, STMTR)Reference:Although the staple capacity of the aforementioned Finisher units is specified like the above, onrequests from the field, the units were so designed that they staple more than the number ofsheets described above with regard to all basis weights in case the total number of sheets to bestapled is set within 100 sheets. But, please be informed that a problem may occur when theunits staple more than the number specified above.5.3 Number of sheets and size specification for saddle stitching Description- Paper size applicable for saddle stitching: 12 x 18, SRA3 (320 x 450), A3, B4, A4R, LDR, LTRR, LGL- Basis weight: Inner sheets: 64 to 200g/mx2 Cover: 64 to 300g/x2- Maximum number of sheets for binding: 20 sheets (Inner sheets (64 to 80g/mx2) 19 sheets + Cover (64 to 300g/mx2) 1 sheetPlain paper64 to 80g/mx2 2 to 20 sheets (incl. cover)81 to 105g/mx2 2 to 15 sheets (incl. cover)Over 105 to 200g/mx2 2 to 5 sheets (incl. cover)Coated paper80 to 81.4g/mx2 2 to 15 sheets (incl. cover)81.5 to 105g/mx2 2 to 10 sheets (incl. cover)Over 105 to 200g/mx2 2 to 5 sheets (incl. cover)