67Using Optional Conversion LensesUsing Optional Conversion LensesAttaching the optional TL-H58 Tele-converter increases the focal length ofthe camcorder by a factor of approximately 1.5. Attaching the optionalWD-H58W Wide-converter decreases the focal length by a factor ofapproximately 0.8. When you attach a conversion lens, perform theprocedure below to optimize the autofocus and minimum object distancefor the particular lens.1 Open the [Conversion Lens] submenu.[l Camera Setup] [Conversion Lens]2 Select [TL-H58] or [WD-H58W] and then press SET.• If the autofocus is set to Instant AF or Medium AF, it will change to Normal AF.• The minimum object distance throughout the entire zoom range will be approximately 130 cm (4.3 ft) whenusing the tele-converter and approximately 40 cm (1.3 ft) when using the wide-converter.• Select [Off] if you do not intend to use a conversion lens.NOTES• If you set an assignable button to [TL-H58] or [WD-H58W] (0 97), you can press the button to optimize thesettings for the selected conversion lens.Operating modes:[l Camera Setup][Conversion Lens][Off]
