127Connecting to an External Monitorb Using the HD/SD SDI TerminalThe digital signal output from the HD/SD SDI terminal includes the videosignal, audio signal and time code signal. If necessary, perform thefollowing procedure to change the output to HD or SD. Turning the outputoff will conserve the camcorder’s power.1 Open the [SDI Output] submenu.[N Video Setup] [SDI Output]2 Select the desired option and then press SET.• If you selected [HD], no more settings need to be made. If you selected [SD], you can select the SD outputmethod (0 125).NOTES• If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor(0 128).Using the HDMI OUT TerminalThe HDMITM OUT terminal also offers a digital connection and outputs both a video and audio signal. The outputsignal will automatically switch to HD or SD depending on the capability of the external monitor.NOTES• Correct operation cannot be guaranteed when connecting the camcorder to DVI monitors.• Video may not be output correctly depending on the monitor. In such case, use another terminal.• If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor(0 128).• You can select the SD output method (0 125).Using the HD/SD COMPONENT OUT TerminalThe HD/SD COMPONENT OUT terminal outputs an analog HD or SDvideo signal. If necessary, perform the following procedure to change theoutput to HD or SD.1 Open the [Component Output] submenu.[N Video Setup] [Component Output]2 Select the desired option and then press SET.• If you selected [HD], no more settings need to be made. If you selected [SD], you can select the SD outputmethod (0 125).NOTES• If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor(0 128).[N Video Setup][SDI Output][Off][N Video Setup][Component Output][HD]
