117Clip OperationsUsing the Clip Menu1 Select a clip and then press SET.• The clip menu appears. Available functions depend on the index screen and which functions are enabled.2 Select the desired function and then press SET.• The function is enabled. For some functions, further action may be required. Follow the onscreen directions.• Press the CANCEL button instead to return to the clip index screen.Displaying Clip InformationSelect [Display Clip Info] in the clip menu to display the selected clip’s information screen ([Clip Info] screen).Push the joystick left/right to switch to the previous/next clip. When you are finished, press the CANCEL buttonto return to the clip index screen.Displaying the User MemoWhen displaying the [Clip Info] screen of a clip that has an embedded user memo, push the joystick up to displayit. Push the joystick down to return to the [Clip Info] screen.Displaying Custom Picture SettingsWhen displaying the [Clip Info] screen of a clip that has a custom picture file recorded with it, push the joystickdown to display the first of three screens with the clip’s custom picture settings ([X Data 1/3] screen). Push thejoystick down to switch the [X Data 2/3] screen J [X Data 3/3] screen J [User Memo] screen J [Clip Info]screen.1 243591078614 13 12 111 Thumbnail of the selected clip2 Shot mark (0 86)3 Recording date and time4 Clip name (0 42)5 Bit rate and resolution (0 46)6 Special recording mode / Frame rate (0 88): Forslow & fast motion recording mode, the shootingand playback frame rates will be displayed.7 e mark / Z mark (0 118)8 Embedded custom picture file (0 99)9 Time code of the last frame in clip10 Clip duration11 Time code of the first frame in clip12 Time code of the clip thumbnail13 Thumbnail of the next clip14 Thumbnail of the previous clip
