Canon XF100 Instruction Manual

Also see for XF100: User guide Instruction manual Instruction manual

Contents

Canon XF100 Instruction Manual Manual pdf 107 page image

107Customizing Functions and Onscreen DisplaysCustomizing Functions and Onscreen DisplaysCustomize the camcorder to match your shooting style and needs. Use the [J Other Functions] [CustomFunction] setting to adjust how some of the camcorder’s controls and functions operate in mode.Similarly, use the [M LCD/VF Setup] [Custom Display] setting to customize the onscreen displays thatappear during recording. You can save these preferences along with other menu settings to an SD card and usethem again later (0 109).Customizing FunctionsThe following table describes which functions can be customized using[Custom Function]. For more details, refer to [Custom Function] (0 154).1 Open the [Custom Function] submenu.[J Other Functions] [Custom Function]2 Select the desired function.3 Change the setting option and then press SET.Operating modes:[J Other Functions][Custom Function]Customizable Functions with [Custom Function]Menu item Description[Shockless Gain] Determines the speed of the transition when the gain is changed.[Shockless WB] Creates a softer transition when the white balance is changed.[AE Response] Controls the camcorder’s response when you change the automatic exposure setting.[Iris Limit] Sets a maximum aperture value (F8.0) to be used for shooting.[I. Ring Direction] Changes the direction of the adjustment when turning the manual ring while it is set to IRIS(ND).[F. Ring Direction] Changes the direction of the adjustment when turning the manual ring while it is set to FOCUS.[Z. Ring Direction] Changes the direction of the adjustment when turning the manual ring while it is set to ZOOM.[F. Ring Control] Selects the sensitivity of the response when operating the manual ring while it is set to FOCUS.[Z. Ring Control] Selects the sensitivity of the response when operating the manual ring while it is set to ZOOM.[F. Assist B&W]Automatically switches the screen to B&W while the focus assist functions (peaking and magnification) areactivated. You can have the screen switch to B&W when only the peaking is activated, when only themagnification is activated or when both are activated. Focus assist functions will not appear on an externalmonitor.[Obj. Dist. Unit] Selects the units of distance (meters or feet) displayed when the camcorder shows the distance to thesubject in manual focus mode.[Zoom Indicator] Selects the display of the zoom indicator between a graphic bar and a numeric display (0 to 99).[ZR-2000 AE Shift] Selects the function of the AE SHIFT dial on the optional ZR-2000 Zoom Remote Controller between adjustingeither the exposure compensation or the aperture value.[Scan Reverse Rec] Inverts the recorded image horizontally, vertically or horizontally and vertically.[Character Rec] When this function is set to [On], all of the onscreen displays will be recorded to the clip exactly as theyappear on the screen.