115PlaybackAdjusting the Built-in Speaker Volume1 Open the [Speaker Volume] submenu.[m Audio Setup] [Audio Output] [Speaker Volume]2 Select the desired level and then press SET.• Select [Off] to mute the audio.NOTES• For details on changing the audio channel, refer to Selecting the AudioChannel (0 129).Adding Shot Marks during PlaybackYou can add an c mark, d mark or both marks to a clip during playback or playback pause. You can add eithermark using assignable buttons or an c mark using the wireless controller’s SHOT1 button.1 Set an assignable button to [Shot Mark 1] or [Shot Mark 2] (0 97).2 During playback or playback pause, press the assignable button at the point in the clip to add theshot mark.• A message indicating the shot mark appears on the screen and the shot mark is added to the clip.• Adding a shot mark to a clip during playback will pause the playback.• Up to 100 shot marks (c and d marks combined) can be added to a single clip.• There may be up to a 0.5 second delay from when you press the button to when the camcorder adds theshot mark.[m Audio Setup][Audio Output][Speaker Volume][8]
