101Custom Picture SettingsTransferring Custom Picture FilesYou can transfer custom picture files between the camcorder and SD card. When the custom picture file is in thecamcorder, use [Copy To b] or [Load From b] depending on the operation you wish to perform. Similarly,when the custom picture file is on an SD card, use [Copy To Cam.] or [Load From Cam].Copying a File from the Camcorder to an SD Card1 After selecting a file in the camcorder, open the [Copy To b] submenu.[H X Transfer File] [Copy To b]2 Select the file slot under which to save the file and then press SET.• If there are available slots, you can select [New File] to save the file inthe first available slot.3 Select [OK] and then press SET.• The currently selected file will be copied to the selected slot on theSD card, overwriting the file in that slot.4 Press the MENU button to exit the menu.Replacing a File in the Camcorder with a File on an SD Card1 After selecting a file in the camcorder to replace, open the [LoadFrom b] submenu.[H X Transfer File] [Load From b]2 Select the file to transfer to the camcorder and then press SET.3 Select [OK] and then press SET.• The file in the camcorder will be overwritten by the one on the SDcard.4 Press the MENU button to exit the menu.Copying a File from an SD Card to the Camcorder1 After selecting a file on the SD card, open the [Copy To Cam.]submenu.[H X Transfer File] [Copy To Cam.]2 Select the file slot under which to save the file and then press SET.3 Select [OK] and then press SET.• The currently selected file will be copied to the selected slot on thecamcorder, overwriting the file in that slot.4 Press the MENU button to exit the menu.Replacing a File on an SD Card with a File in the Camcorder1 After selecting a file on the SD card to replace, open the [Load FromCam.] submenu.[H X Transfer File] [Load From Cam.]2 Select the file to transfer to the SD card and then press SET.3 Select [OK] and then press SET.• The file on the SD card will be overwritten by the one on thecamcorder.4 Press the MENU button to exit the menu.[l Camera Setup][ Custom Picture][H X Transfer File][Copy To b][l Camera Setup][ Custom Picture][H X Transfer File][Load From b][l Camera Setup][ Custom Picture][H X Transfer File][Copy To Cam.][l Camera Setup][ Custom Picture][H X Transfer File][Load From Cam.]
