Connecting to an External Monitor128Using the AV TerminalWhen you output video from the AV terminal, the video signal is converted to an analog SD composite videosignal. In addition, the AV terminal also outputs audio. You can select the SD output method (0 125).NOTES• If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor(0 128).• When you play back a clip on a monitor with a 4:3 aspect ratio, the monitor will switch automatically towidescreen mode if it is compatible with the Video ID-1 system.Superimposing Onscreen Displays to Appear on anExternal MonitorYou can choose to superimpose onscreen displays on the video outputfrom the HD/SD SDI terminal (b only), HDMI OUT terminal, HD/SDCOMPONENT OUT terminal or AV terminal. Doing so will display theonscreen displays on an external monitor. You must set this functionseparately for HD and SD output. This setting will not affect yourrecordings.1 Open the [HD Onscreen Disp.] or [SD Onscreen Disp.] submenu.[N Video Setup] [HD Onscreen Disp.] or [SD Onscreen Disp.]2 Select [On] and then press SET.• G appears on the right side of the screen (when [M LCD/VF Setup] [Custom Display 2] [OutputDisplay] is set to [On]).NOTES• Onscreen displays will not appear on an external monitor for SD output if [N Video Setup] [SD Output] isset to [Side Crop].[N Video Setup][HD Onscreen Disp.][SD Onscreen Disp.][Off]
