(F) Intensity(2) Press the Settings button to adjust the settings as necessary.NoteTo change the page size, media type, intensity, or image quality,see Changing the Copy Settings.To copy with various layouts, see Using Useful Copy Functions.(3) Press the Color button for color copying, or the Black button for black & whitecopying.The machine starts copying.ImportantDo not open the Document Cover or remove the original from the PlatenGlass until copying is complete.NoteWhen printing first after changing the media type, the messageasking you to confirm the position of the paper thickness lever mayappear on the LCD. If this message is displayed, make sure that thepaper thickness lever is set appropriately, then press the OK button.To cancel copying, press the Stop/Reset button.The machine can also receive faxes in copy mode (when theCOPY button is pressed).Reducing or Enlarging a CopyYou can reduce or enlarge copies.1 Prepare for copying.See Prepare for copying..2 Select the reduction/enlargement method.(1) Press the Settings button.(2) Press the or button to select the reduction/enlargement method, then press the45
