Paper Does Not Feed ProperlyCause ActionPrinting oninappropriate type ofpaper.Check to see if the paper you are printing on isnot too thick or curled.See General Information.Paper feed roller isdirty.Clean the paper feed roller. Cleaning the paperfeed roller will wear the roller, so perform thisprocedure only when necessary.For details on cleaning, see Cleaning the PaperFeed Roller (Roller Cleaning).Paper not loadedproperly.Make sure of the following when you load paperin the machine.When loading two or more sheets ofpaper, align the edges of the sheets beforeloading.Always load the paper in portraitorientation in the Rear Tray, regardless of theprinting orientation.Load the paper with the print side facingUP. Align the paper stack against the rightside of the Rear Tray and slide the PaperGuide so that it just touches the left edge ofthe stack.For details on loading paper, see Loading Paper.Too much paperloaded.Make sure that the paper stack does not exceedthe load limit. However, proper feeding of papermay not be possible at this maximum capacitydepending on the type of paper or environmentalconditions (either very high or low temperatureand humidity).In such cases, reduce the sheets of paper youload at a time to around half.For details on loading paper, see Loading Paper.Foreign object in theRear Tray.Make sure that there are no foreign objects in theRear Tray.183
